Binders
Special Designs
WÄLLER binders are made of fibreboard and designed to meet higher usage demands.
Choice of left or right-hand fitting. |
| |
| Sample W52
Special binder 1725
- Made of 0.9mm blue fibreboard
- 250mm deep x 324mm tall; spine width 25mm
- 0.6mm fitting flange with metal fitting glued into back cover; right-hand fitting
- 2 heavy Wäller hooks positioned at 75mm
- Special 23/O spine label
- Straight 250gsm grey pocket with expanding gusset in front cover
- Diagonal 250gsm grey pocket with expanding gusset in back cover
- Glued-on 10x75 title tab
|
| |
| Sample W58
Special binder 1720
- Made of 1.0mm plain black fibreboard
- 250mm deep x 324mm tall; spine width 20mm
- Fitting flange made of 1.0mm fibreboard with double metal fitting stapled into spine
- 2 heavy Wäller hooks positioned at 75mm
- Special 23/O spine label, grey
- 250gsm straight pocket with expanding gusset and 2 holes (measuring 25mm in diameter each) glued into back pocket
|
| |
| Sample W64
Special standing file
- Made of 1.2mm marbled fibreboard
- 250mm deep x 324mm tall; spine width 20mm
- Special 23/O spine label, grey
- Glued-on title tab 10x75
- Three flaps made of 250gsm grey cardboard, each with 6 bending creases, glued into top, bottom, and side of rear cover
|
|
| |
| Sample W66
Special binder 1710
- Made of 1.2mm marbled fibreboard
- 250mm deep x 324mm tall; spine width 10mm
- 3 fitting flanges made of 0.6mm fibreboard glued into rear cover, each flange with metal fitting; all right-hand fitting
- 2 heavy Wäller hooks positioned at 75mm
- Standard grey spine label
|
|
| |
| Sample W67
Special binder 1715
- Made of 1.2mm marbled fibreboard
- 250mm deep x 324mm tall; spine width 15mm
- Fitting flange made of 0.6mm fibreboard with metal fitting glued into rear cover; left-hand fitting
- 2 heavy Wäller hooks positioned at 75mm
- Standard grey spine label
- Straight pocket with expanding gusset made of 250gsm grey cardboard glued into front cover
|
| |
| Sample W69
Special binder 1720
- Made of 1.2mm marbled fibreboard
- 250mm deep x 325mm tall; spine width 20mm
- 3 dividing sheets made of 250gsm grey cardboard with unprinted tabs stapled into spine, metal fitting on each tab; right-hand fitting
- 2 heavy Wäller hooks positioned at 75mm
- Standard grey spine label
- Embossing at top right
|
