Files

Special Designs

WÄLLER files are suitable both for holepunched papers (fitting available on right or lefthand side) and for loose papers.

Sample W26

Special file

• Made of 500gsm grey cardboard
  
• 250mm deep x 325mm long; spine width 25mm
  
• Two 1.7mm fibreboard flanges stapled inside front and rear covers, both with plastic-coated fastening strips with additional caps, 200mm long, and plastic cover strips
  
• 2 heavy Wäller hooks
  
• Black spine printing, red special printing on front cover

Sample W27

Special File 220

• Made of 250gsm yellow cardboard
  
• 255mm deep x 322mm tall
  
• Metal fitting; left-hand fitting
  
• 2 Wäller hooks (hook position 60mm)
  
• Special printing on inside and outside of front cover and special spine printing
  
• Glued-in spine reinforcement, 88mm wide

Sample W28

Special file 215

• Made of 320gsm green cardboard
  
• 235mm deep x 322mm tall, spine width 15mm
  
• U-style flange with left-hand fitting; one full-page dividing sheet with left-hand fitting wirestitched to the U-style flange; plastic-coated fastening strips without caps and metal cover strips on both the flange and dividing sheet
  
• 2 Wäller hooks (hook position 60mm)
  
• Special printing on front cover; spine printing A-Z and 3 x 0-9
  
• Glued-in spine reinforcement, 88mm wide

Sample W29

Special file 215

• Made of 320gsm chamois cardboard
  
• 235mm deep x 322mm tall, spine width 15mm
  
• Fitting with plastic-coated fastening strip with additional cap and plastic cover strip; right-hand fitting
  
• 2 Wäller hooks
  
• Special printing on front cover, shortened 23/O spine printing
  
• Clear tab 10 x 75 glued to top of spine
  
• Glued-in spine reinforcement, 88mm wide